Lighting & Indicadores Para Husqvarna TE510

Motorcycle Lighting and Indicators for Husqvarna TE510

Husqvarna is a Swedish company that began producing bicycles and motorcycles by the early 1900s. In order to safely ride the Husqvarna TE 510 motorcycle, you may occasionally need to replace the lighting indicators or bulbs. You may also want to upgrade the lighting indicators for aesthetic purposes.

• Hand guard turn signals: The hand guard turn signals for the TE510 are accessory lights that fit onto the handle bars. The hand guard turn signals typically have an amber covering and multiple LEDs in the assembly.
• Front headlights, rear taillights, and brake lights: Headlights make it easier for you to see whats ahead of you on the road when riding your Husqvarna. The taillights enhance your visibility to other drivers on the road. They usually have transparent covers, while brake light indicators have red covers.
• Front and rear turn signals: Forward-facing and backward-facing turn signals allow you to signal your intentions to make a right or left turn. They have amber covers.

• Select by placement: Select lighting indicators that fit onto the right, left, front, or back areas of your Husqvarna bike. Different models and production years of the Husqvarna TE 510 have slightly different positions, shapes, and sizing requirements. There are also fuel indicators that show how much fuel remains in your bike.
• Choose between one light or an assembly kit: Choose just one light, bulb, or indicator, or an entire kit that includes the rear and forward, left and right indicators. Some of the bike lighting indicator kits also have handle bar guard lights and left and right frontal mirrors.
• Select the type of light: Select a halogen or LED bulb for light on your bike.

To keep your Husqvarna bike roadworthy, you need to replace the halogen or LED bulbs that go out on the light indicators.

1. To replace a bulb, use a Phillips head screwdriver to remove the lens or cover for the headlight, taillight, or handle bar indicator light.
2. Pull the bulb housing out of its place and disconnect the wires. Grasp the bulbs base and pull it out. Some housing assemblies have clips to keep the bulbs in place. Putting pressure on the clips releases the bulb.
3. Mount the replacement bulb into the base and reconnect the wires. Push the housing back into its slot.
4. Reattach the screwdrivers and lens with the Phillips head screwdriver. Turn on the engine to test the lights.